Breath and Lungs health analyzer with Respiratory analyzer over internet of things

Breath And Lungs Health With Respiratory Analyzer Over Internet Of Things(IOT)

Technical Specifications:

Title of the project                  :           Breath And Lungs Health With Respiratory Analyser Over

Internet Of Things(IOT)

Domain                                   :           Biomedical, Embedded Systems

Software                                 :           Embedded C, Keil, Proload

Microcontroller                       :           MCU 8051

Power Supply                          :           5V, 500mA Regulated Power Supply

Crystal                                     :           11.0592MHz

Display                                    :           LED 5mm, 16 X 2 LCD

Lung Health Sensor Module   :           1

IOT Module                            :           1

Applications                            :           operation theatres, I.C.units, biomedical/human        .

 

 

Abstract:

With the proliferation of Internet of Things (IoT) devices such as smartphones, sensors, cameras. It is possible to collect massive amount of data for localization and tracking of Health of the patient. This project describes the design of a simple, low-cost controller based patient health monitoring system.

This instrument employs a simple Opto electronic sensor, conveniently strapped on the finger, to give continuous indication of the pulse digits. The Pulse monitor works both on battery or mains supply. It is ideal for continuous monitoring in operation theatres, I.C.units, biomedical/human engineering studies and sports medicine.

This project uses AT89S52 Microcontroller as heart of the project. We are using switch array to select the age of human being. It starts from children to elders. Firstly we need to select the age by using switches. Then we need to inhale the air, by using the IR sensors we can know the person is healthy or unhealthy. If the person is unhealthy then the buzzer will be activated. The LCD is used to display the health condition of the person.

This project uses regulated 5V, 750mA power supply. 7805 three terminal voltage regulator is used for voltage regulation. Bridge type full wave rectifier is used to rectify the ac out put of secondary of 230/12V step down transformer. Lung Health analyzer will be displayed on the LCD display which is connected to the Microcontroller.


Comments are closed.